changing the rigol DS1052E to DS1102E using USB , the dummy guide

[psyko_chewbacca]

Hi straycat,

Could I please have the latest version of the firmware for my DS1000E scope.

It's already hacked as a DS1152E and is currently on firmware 4.01 (HW version 58).
Here's my email:
psyko_chewbacca@hotmail.com

Thanks!

[essence25]

I would also like the new firmware please.
Thank you! 1052E 00.03.01

[techkarlsson]

Hi,

First of all, a big thanks to everyone involved in developing this "mod". Highly appreciated!

I have a DS1052E and just want to clarify that this one a moddable. I've not made any upgrade/update of it since purchase.

Code: [Select]

Model:         DS1052E
Serial:        DS1ET16XXXXXXX
Software_      00.04.01.00.02
               DSP: 00.01
               FPGA: 03.07
               HardV: 58

FFT, USB, P/F and RS232 installed
Will I be able to mod it i.a.w the dummy guide?

[raspi]

please send me the mod too

thank you

dennis.fukas@googlemail.com

[techkarlsson]

Went back some pages and downloaded SW to a stick. After upgrade I've got 2ns timebase.
Superb. Well done guys 

[vlbk]

Hi! A'm have DS1052E with firmware version 00.04.01 SP7.
Can you sent me a new version of the hacked firmware?

My e-mail: vlbk@inbox.lv

More thanks and best regards
Vladimir

[ValGlu]

Hello, straycat.
Can you sent me the ORIGINAL version of the new firmware (00.04.02)?
Many thanks!
My e-mail: valg@ukr.net

[lektronick]

http://beyondmeasure.rigoltech.com/acton/attachment/1579/1579:f-032d/0/s-06fe-1510/-/l-3f49/l-3f49:583/?sid=OIvydEiiU

Released version:  00.04.02.01.00
Release Date: 7/28/2015

[straycat]

hI GUYS, .Thank you guys for your messages, the one,s that have asked about the new firmware 00.04.02.01.00 can it be updated to 100mhz, the answer is yes already done..

[freimann]

Hi Straycat,

would you please send me the new firmware ...

Thank you - peter@freimann.cz - DS1052E @ 02.06

[ceaushu]

Hi Straycat, could you please send me the file for DS 1052E  (current version 00.04.02.01.00), modified for 100 MHz ?
Thank you!

The e-mail address is ceaushu@yahoo.com

[w33m4n_]

Hi everybody,
i have got my new ds1052e
the firmeware is 00.04.02.01.00 HW=58
i want to modify it to do the 100mhz. but i dont understand the guide.
can somebody tell me how it works with my firmware version?

thanks

[straycat]

Hi w33m4n. have emailed you the new update. To install it, put the file on a usb stick, plug it in your scope, it should say new or same update found"do you want to install" just install it, re-start your scope and your done. Hope this helps.

[straycat]

Hi,

First of all, a big thanks to everyone involved in developing this "mod". Highly appreciated!

I have a DS1052E and just want to clarify that this one a moddable. I've not made any upgrade/update of it since purchase.

Code: [Select]

Model:         DS1052E
Serial:        DS1ET16XXXXXXX
Software_      00.04.01.00.02
               DSP: 00.01
               FPGA: 03.07
               HardV: 58

FFT, USB, P/F and RS232 installed
Will I be able to mod it i.a.w the dummy guide?

STRAYCAT.
Doing the update the old way i would say no on that,although i have done many without any issues,. The problem you will have is that the firmware you have installed you cant downgrade unless you know what your doing i.e modding the firmware. My advice is to just update it with the new firmware on a usb.. Hope this helps.

[Input220v]

Hi StrayCat,
What do you think about this version?
DS1052E
Serial No. DS1ET xxxxxxxx
Software Version 00.04.01.07.00
HardVersion = 58
I can send dump flash s29gl064 and  24lc04 eeprom
maybe you have solution to downgrade the firmware to get 100MHz

[ValGlu]

Hello, lektronick.
Thanks for the link.

[straycat]

Just would like to say,glad all you guys who have emailed me are happy with the modded 00.04.02.01.00 update, Glad i could help.

[fauweh]

Hi Straycat,
could you please send me the modded firmware for 100 MHz?
My Scope is a DS1052E @ original 00.04.02.01.00
Thank you in advance!
My mailadress: fau-weh@gmx.de

[N7PXY]

straycat,
I would also like a copy of the software to modify a DS1052e from 50mhz to 100mhz.
Thanks,
PJ
hickspj467 (at) Comcast.net

[Borat]

I realise this is my first post so Hi guys and girls.

I wanted to know if this "hack" is still working ok? I was going to buy a DS1052E from rigol.co.uk but wanted to be sure this still works ok on the latest firmware. Last thing I want is for it to be patched in the latest version (04.01 I think).

If it is, could I get a copy of the modded firmware please?

[straycat]

Borat,.   Yes it can modded to 100mhz. Hope this helps.

[Borat]

Thanks for getting back straycat! Shifted my attention to the 2072A "thanks" to an eevblog youtube video - damn you eevblog! *shakes fist*

[shiftline]

Hey Guys, I'm about to order my first real o-scope (well i have a cheap USB one..)

I was looking at the Rigol DS1102Eg until i found this wonderful upgrade for the Rigol DS1052E.   Mind as well save $80 if the hardware is the same..Acording to the video it looks like I will have to downgrade the firmware to mod it.. I cant seem to find a link so like the previous post could someone please hook me up with a copy! 

Thanks guys!   I'm to get my new toy

[Arses]

Hi, all!
Please send me last firmware) email: sendbox0(at)ukr.net
THX

[shiftline]

me too please  sicon99 (at) hotmail (dotcom)