Hey babysitter
yeah I am making frequency , voltage , capacitance and resistance reference
I know you can buy them from voltagestandard.com but I like making things
and I am trying to make this cheaply so dekapot or dekavider would break my bank
yes I have been using high value resistors in the divider to make sure I do not
draw too many mA from my regulator
so far I have 5v and 10v regulators at %0.05
100r and 5k resistors at %0.05
15nF cap at %1
and some other caps at %0.5
once it all worked out I will use a precision resister as a load on
one of the regulators to draw about 1mA and that will be my current reference