Xgecu T56 or some other programmer

[Neshco]

I am in a search for some programmer for my lab that can cover most of the needs in general and that does not cost the kidney.
T56 have decent price but does not have (for the money) as near adapters as TL866 II+ have, and if someone know if those adapters can be used with the T56?
Or maybe, there is some other programmer in price range that cover that amount of devices and sockets with free fw updates?
There is no specific use for the programmer at the moment, but intention is to get most of it for the future projects of mine, known and unknown at this point.
Highly appreciate any advise.

[u666sa]

T56 does not know how to do EMMC. It does not know how to deal with keys. 
You might have an adapter, and it might support the chip, but if certain condition do not meet, it can not copy. In TVs certain conditions usually do not meet.

You need entt2 or UFPI.

It is good to have T48 in addition of one of the above programmers. Keep in mind, T48 has 5-in-1 adapter -- https://aliexpress.ru/item/1005004827219410.html which is great, but is missing two spacers, which you will have to get separately. T56 is better, it support more chips, but it is more expensive and you will have to get each adapter separately, it is considerably more money. I suggest you get T48 in addition on entt2 or UFPI... Out of the latter two, UFPI Platinum is king, if you can lay your hands on it.

[u666sa]

http://forums.xgecu.com/viewthread.php?tid=26&extra=page%3D1
https://www.xeltek.com/resources/technical-articles/memory-device-types/nand-flash-programming/

Guy restored tcl led40d2930. Nobody could do it because keys are inside CPU. He has T56, and tried it and it couldn't do it. Entt2 and it was done. Because Entt2 knows how to work with keys. So does UFPI. They were made by people who repair TVs. 


Conclusion. You can not have a 1 do it all programmer. You gotta have one or several that do chips you come across most often. It is an investment that should last you about 5 to 10 years. After that time there is going to be new, great, programmer that does do what the other one does not do. 

[coromonadalix]

you can find very powerful programmers    who'll do tons of parts   Xeltek  Elnec     etc .... with isp  jtag   etc  ...

one who gain some good traction is the tnm7000  min 300$ usd on some websites      not the expensive one  on Ali

you'll need deep pockets


what is mentioned are special cases   not the ususal stuff,       you need to search many companies to find supported parts

rt809  has a good reputation too, but you have a small model and a bigger one who can do screens   etc...


yes there is no ultimate programmer,  i had tons of avr, pic, Xilinx  stm32 msp430  .... freescale, jtag spi  .....  and still missing something,

mostly on mcu''s side, old hitachi stuff, mitsubishi stuff   etc  .... obscure programmers who are very hard to get ... old stuff nobody can remember correctly
special parts ....   even some old serial or parallel ones,  who never had any upgrades to usb ports .....

the list goes on and on 


@u666sa        would be nice to provide link to thoses entt2 or UFPI  programmers, never heard of them ?

[u666sa]

https://www.ufpi.pro/en/  &  https://mslw.com/  UFPI
https://www.ejtag.ru/viewtopic.php?f=8&t=343  entt (Easy NAND Tiny Tools)


T56/T48? They don't know how to work with keys. No bueno when it comes to NAND from TVs. Which is a common problem. TV comes these days, more often than not, bad NAND since they put entire smart onto nand, after a certain time, depending on how much crap was installed and how it was with disk activity, it goes bad.

[u666sa]

Latest bro

TSOP48 this time TC58NVG0S3ETA00



And this one is from another guy with same chip




This is from group https://t.me/T48_56/941/1803

No bueno!



I bought T48 with stuff for 130 bucks and I'm crying. This is rubbish.

[Neshco]

Thanks guys. For some reason, I did not get feedback that there are replies on the post.
I understand I cannot cover all, I mean, I don`t even need all and in the same time I don`t have clear picture of what I am going to use it all for. So, I just needed directions where to start collecting. Got it that T48 is a good start because of the bunch of the adapters decently priced.
I checked the UFPI, did not even know that this exist. But could not find platinum version, maybe you meant Silver box? And how postal services work at this moment with Russian federation at the moment because of the SMO?

[colenz3296]

Hi I've just been reading through the posts. I'm looking at replacing the emmc Chip on Sony KD-65X8500E board. It uses a Samsung based emmc chip and is supported by both the T56 and T48. My understanding is that you can flash them with a donor firmware. But  apps like Netflix won't work after that. Does anyone know how to modify the firmware to get it to work?

I'm trying to get a understanding of what is required and where that information is stored on the board to extract? Has anyone delt with a sony Google based tv before and can answer it or point me in the right direction?